saber cycle logo-BLK708x90
Wish ListGift Certificate Search
DS1-3

Ignition, Electronic Dynatek GL1000

Ignition, Electronic Dynatek GL1000
Average rating:
2 reviews
Read all reviews
$169.00
DS1-3
Share on Facebook Pin It Bookmark and Share

The DYNA S DS1-3 electronic ignition system eliminates your entire points plates assembly and installs in the original position. It was designed for use with stock coils but can be used with other coils that have at least THREE OHMS primary resistance in which case the ballast resistor will be bypassed. Good quality suppression core/resistor spark plug wires wires should be used. Avoid those made of copper unless using stock resistor plug caps.

Ignition, Electronic Dynatek GL1000
Average rating:
2 reviews

Read all reviews

Featured positive reviews:

Ignition, Electronic Dynatek GL1000
Wyzckcr
By 
Part 2 of my review... this is my finding on 75-77 GL1000 so apply at your own risk. After doing some Internet reading here is how I set my dyna. First a little background, seems that some GL1000s had messed up F2 timming marks. I could never get the old points firing like they should but, I blamed it on the points. So if your bike seems to not have the power 1000cc should try this on static setup. 1. set dyna 3-4 module (one on left that is non adjustable) to just past the T mark that follows the F2 mark and lock it in place (see manual). 2. Set the 1-2 module (right adjustable) to the F1 mark. 3. If that helps you have tha above messed up F2 mark. p.s. I checked belt alignment was dead on AOK so it's in the flywheel. Thanks Honda, where's the 35 year old recall?