Polished high density alloy floorboards for the GL1500 with rubber pads like the stock Honda rear passenger boards have a shifter and chrome steel brake pedal extender. These boards by M/C Enterprises of the USA are the best board for short riders. DEFECT DISCLAIMER: Models 1988, 1990 to 1995 may have incurred production line errors involving the welding of the frame when Honda reverted from robotic welding in 1989 to hand welding on the assembly line. The following problem does not occur on the 1989 models as this model was perfectly built and the frame work assembly was done by a robot so that everything welded on all bikes of that production year are in the same place. The following problem never occurs on the left side. On the 1988, 1990 and 1991, you may discover after inserting the RIGHT SIDE FLOORBOARD MOUNT that the board will cant up to the right about 5 to 20 degrees from the horizontal plane. To remedy, use a small flat grinding file to open up the lower part of the footpeg mounting slot on the frame to allow the floorboard mount to drop to a lower angle. File to create a flat horizontal position as a tiny upward cant for the board is required to stop the riders feet from sliding sideways especially when riding in the rain. On the 1992 to 1995 models, the boards may tilt up from front to back which can be remedied by modifying the floorboard mount on the right side as instructed in a diagram that will be included with the boards for those model years. We must emphasize that when you order this floorboard set, you are giving your express consent and accepting our caveat on purchasing them AS IS. Our terms of sale for this SALE ITEM IS: NO REFUND, NO EXCHANGE, NO RETURN which is the same as ON all the other sale items. We disclaim any responsibility for errors made by Honda that cause the misfit of any product that we sell.