Saber Cycle Honda GoldWing (Gold Wing) Parts and Accessories - Barracuda Bike Parts

High quality air cut off valve kit for Honda:

* CB650 and CB650C, 1980
* CB750C-F-K-SC, 1980 - 1983
* CB900 and CB900C, 1980 - 1982

Includes parts...

Add to Wishlist

24-inch long chrome tip that replaces the tip of our fold-down, stock-style antenna , 76-200, intended for TYPE I, II, III CLARION PANASONIC radio systems. This tip will fit the ballast coil of any of the 76-200 antennas we sold in the past.

NOTE: Allen head set screw not included.

This fold-down, stock-style antenna is for 1980 to 1987 Interstate, Aspencade, Limited, SEI models and TYPE I, II, III CLARION PANASONIC radio systems. It comes with a MOTOROLA-type, cable end, push fitting for the above systems only.  More . . .

Markland-style GL1100 passenger armrests for years 1980 to 1982 Interstate and Aspencades with swing-out armrests that come with stitched (not heat sealed), dual position, black vinyl pads on beautiful 304 mirror-...

Add to Wishlist

Black GL1500 driver backrest that fits only stock driver seats and includes a passenger vanity pouch on the backrest pad for finger-tip access by the passenger. NOTE: Picture of installed backrest is a representation. The mounting bracket and hardware is the same but the backrest pad and vinyl sleeves are black and the pad is shaped differently as pictured in a closeup.

Three (3) complete sets of anti-squeal compound brake pads to replace all three sets on the 1977 to 1979 Honda CB750F and 1979 Honda CBX. These 3 brake pad sets fit the two calipers on the front wheel and the one caliper on the rear wheel...

Three (3) complete sets of anti-squeal compound brake pads to replace all three sets on the 1980 Honda CB750F and 1981 Honda CB900C. These 3 brake pad sets fit the two calipers on the front wheel and the one caliper on the rear wheel...

Add to Wishlist

Three (3) complete sets of anti-squeal compound brake pads to fit the two calipers on the front wheel and the one caliper on the rear wheel of these models:

* CB750F, 1981 - 1982
* CB900C, 1982
More...

Three (3) complete sets of anti-squeal compound brake pads to replace all three sets on the 1981 to 1982 Honda CBX. These 3 brake pad sets fit the two calipers on the front wheel and the one caliper on the rear wheel...

Three (3) complete sets of anti-squeal compound brake pads to replace all three sets on:

* VF1100C MAGNA, 1983 - 1986
* VF1100S SABRE, 1984 - 1985...

Anti-squeal compound brake pad set for each caliper (disc) of the GL1200 front and rear brakes. All Goldwings have two calipers on the front wheel and one caliper on the rear wheel...

Add to Wishlist

Semi-metallic disc brake pad set for each caliper (disc) of the front brakes. These brake pads are composed of sintered copper in a non-asbestos coliphony base. All Goldwings have two calipers on the front wheel and one caliper on the rear wheel...

Add to Wishlist

Semi-metallic disc brake pad set for each caliper (disc) of the rear brakes. All Goldwings have two calipers on the front wheel and one caliper on the rear wheel...

Add to Wishlist

Three (3) complete sets of anti-squeal compound brake pads to replace all three sets on the 1980 Honda CB900C. These 3 brake pad sets fit the two calipers on the front wheel and the one caliper on the rear wheel...

This mercury carburetor synchronizer tuner (carb synch tuner or manometer) will synchronize up to 4 carburetors at a time. It has a sheet steel body with clear markings incremented every 2cm from 2 to 54 for simple accurate tuning and includes vial of mercury, hose, line restrictors, 5mm (for Honda, Kawasaki and...

This waterproof chrome capped universal cigarette lighter comes with a wiring harness for easy installation on all OEM and aftermarket fairings and marine vessels. Use for radar detectors and other 12 volt plug-in accessories.

304 Stainless Steel complete exhaust system to fit the GL1100 that comes with all necessary hardware plus four (4) exhaust pipe gaskets. Our system is styled closely to the original OEM design and incorporates the same internal muffler chamber resonance design. It mounts in place of OEM systems and even fits up with our 93-373 chrome extensions.....more

304 Stainless Steel complete exhaust system to fit all GL1200s that have carburetors and not the SEI and Limited that are fueled injected. Comes with all necessary hardware plus four (4) exhaust pipe gaskets. Our system is styled closely to the original OEM design and incorporates the same internal muffler chamber resonance design. It mounts in place of OEM systems and even fits up with our 93-573 chrome extensions.....more

GL1500 and GL1800 to replace OEM 15410-MFJ-DO1 and former OEM numbers, 15410-MM9-003 and 15410-MCJ-000. Made by Barracuda Bike Parts™....more

Chrome, die-cast cover to replace the lower fuel pump cover of the GL1000 and GL1100, 1975 to 1983.Includes two mounting bolt assemblies. By Barracuda Bike Parts™...

Add to Wishlist

Chrome, die-cast cover to replace the upper fuel pump cover of the GL1000 and GL1100, 1975 to 1983. By Barracuda Bike Parts™. Screws are not included because various...

Add to Wishlist

Full engine gasket set for the GL1000 by Barracuda Bike Parts includes the timing belt cover gaskets not usually included in other sets.

NOTE: Valve cover grommets and camshaft oil seals not included.  Camshaft oil seals are not included in any gasket kit because they are considered external to the engine.

Full engine gasket set for the GL1100 by Barracuda Bike Parts includes the timing belt cover gaskets not usually included in other sets.

NOTE: Valve cover grommets and camshaft oil seals not included.  Camshaft oil seals are not included in any gasket kit because they are considered external to the engine.

Full engine gasket set for the 1984 GL1200 by Barracuda Bike Parts. Picture does not include all components. Unlike other aftermarket engine gasket sets, our set includes all the gaskets, o-rings and seals required for a water pump replacement and the correct stator cover gasket for 1984.

NOTE: Valve cover grommets and camshaft oil seals not included. Camshaft oil seals are not included in any gasket kit because they are considered external to the engine.

Full engine gasket set for the 1985 GL1200 by Barracuda Bike Parts. Picture does not include all components. Unlike other aftermarket engine gasket sets, our set includes all the gaskets, o-rings and seals required for a water pump replacement and the correct stator cover gasket for 1985.

NOTE: Valve cover grommets and camshaft oil seals not included. Camshaft oil seals are not included in any gasket kit because they are considered external to the engine.

Full engine gasket set for the 1986 and 1987 GL1200 by Barracuda Bike Parts. Picture does not include all components. Unlike other aftermarket engine gasket sets, our set includes all the gaskets, o-rings and seals required for a water pump replacement and the correct stator cover gasket for 1986 and 1987.

NOTE: Valve cover grommets and camshaft oil seals not included. Camshaft oil seals are not included in any gasket kit because they are considered external to the engine.

Top end engine gasket kit for GL1000 by Barracuda Bike Parts. Contents are as pictured.

NOTE: Does not include two camshaft oil seals which are never included in any gasket kit because they are external to the engine.

Top end engine gasket kit for GL1100 by Barracuda Bike Parts. Contents are as pictured.

NOTE: Does not include two camshaft oil seals which are never included in any gasket kit because they are external to the engine.

Top engine gasket set for GL1200, 1984 to 1987 by Barracuda Bike Parts. Contents are as pictured.

NOTE: Does not include two camshaft oil seals which are never included in any gasket kit because they are external to the engine.

Air chamber or carburetor plenum gasket for the GL1000 that replaces OEM 16075-371-004 by Barracuda Bike Parts.  This gasket is an exact replica of OEM, using the same material to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 owner.

Air chamber or carburetor plenum gasket for the GL1100 that replaces OEM 16075-463-004 by Barracuda Bike Parts. This gasket is an exact replica of OEM, using the same material to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 owner.

Head gasket replaces OEM 12251-371-306 for GL1000 and priced per each. GL1000 cylinder bore is 72 mm or 2.834 inches.

NOTE:  Prior to installation, the Honda GL1000 Work Shop Manual, page 5-14, suggests that old gaskets will come off  easier by soaking with a solvent and never suggests use of an abrasive, such as sandpaper.  Cylinder heads should always be checked for warpage in an X pattern with a machinist's straight edge and feeler gauge.

The Honda Manual instructs using liquid sealer to install head gaskets on page 5-19 but this is no longer necessary. The new head gaskets are graphite-coated and should be dry fitted to create a properly bonded seal. Use of a sealant may compromise its bonding properties.

Ignition switch for all years of GL1200 that is an accurate replica of the original OEM and includes two keys. Honda's 35100-MG9-682 ignition switch was obsoleted around 2006 and is no longer available. Another exclusive by Saber Cycle, commissioned and tooled by Barracuda Bike Parts.

Mirror-polished, SS304 stainless steel kickstand in one-piece solid casting with spring bolt that is not a cosmetic replacement but a solution for the wobbly stock kickstand of GL1000, GL1100 and GL1200 that have a boss rotated too far up. Our kickstand is slightly longer than stock and improves the lean angle......more

Another Saber Cycle® exclusive, this chrome scoop light with amber lens in center flanked on each side by a true air scoop, was first introduced years ago as a "rotor cover scoop light" for the early GL1000, GL1100 and GL1200 rotor covers...

Add to Wishlist

Set of four carburetor manifold o-rings for GL1000 and GL1100 and measures 40mm diameter and 2.6mm thick. These o-rings install at the base of the intake pipes where they connect to the head.

Set of four carburetor manifold o-rings for GL1200 and measures 35.5mm diameter and 2.5mm thick. These o-rings install at the base of the intake pipes where they connect to the head.

Scratch guard for the GL1100 trunk handle, a long lost accessory by Drag Specialties. Our scratch guard is made of mirror-polished 304 stainless steel and has a bolt through...

Add to Wishlist

Pair or two (2) all chrome and polished alloy mechanical shocks for the GL1000 that can be manually spring adjusted to 5 pre-load positions with a supplied wrench...

Pair or two (2) all chrome and polished alloy mechanical shocks for the GL1100 that can be manually spring adjusted to 5 pre-load positions with a supplied wrench...

Pair or two (2) all chrome and polished alloy mechanical shocks for the GL1200 that can be manually spring adjusted to 5 pre-load positions with a supplied wrench...

Pair or two (2) all chrome and polished alloy mechanical shocks that can be manually spring adjusted to 5 pre-load positions with a supplied wrench...

Pair or two (2) all chrome and polished alloy mechanical shocks that can be manually spring adjusted to 5 pre-load positions with a supplied wrench. By Barracuda Bike Parts™...

Mirror-polished 304 stainless steel trunk rack that measures 22 inches X 12 inches which is the standard large size for 1980 to 1987 Interstate and Aspencade...

Set of four (4) tube o-rings for the carburetor air chamber or plenum of the GL1000 and GL1100. These o-rings were never sold as a separate part by Honda but are included in the OEM carburetor gasket sets for GL1000 ( 16010-371-004 ) and GL1100 ( 16010-463-004 ). They are made of the same material as OEM to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 and GL1100 owners.

Clear plastic windshield vent for the GL1500 windshield is similar to the 1990 to 2000 stock SE OEM vent and a lot less money!  This vent is adjustable and closes. Cutting instructions and template included. Fits all GL1500 windshields but can be used for universal application in acrylic, Plexiglass and Lexan windshields....more

High strength Shen Chuen Lite clear acrylic replacement windshield by Barracuda Bike Parts for all 1980 to 1983 Hondaline fairings typically installed on models. More...

High strength Shen Chuen Lite clear acrylic replacement windshield without precut vent for all 1988 to 2000 GL1500 by Barracuda Bike Parts.  This acrylic has superb optical clarity, excellent light diffusion and super weather and UV resistance in tropical and cold climates. Measures 27.5 inches from top center to bottom center of the shield. No drilling or modification is required for installation.

Shen Chuen Lite acrylic has extremely high in elastic modulus and Tensile Strength meeting ASTM D638, with a Rockwell Hardness of M-95 (ASTM D785), Shear Point ASTM D790, as examples, far exceeding performance characteristics of other acrylic screens that we have handled.

High strength Shen Chuen Lite tinted acrylic replacement windshield for all 1980 to 1983 GL1100 Interstate or Aspencade by Barracuda Bike Parts. This acrylic has superb optical clarity, excellent light diffusion and super weather and UV resistance in tropical and cold climates. More...

High strength Shen Chuen Lite tall tinted acrylic replacement windshield for all 1984 to 1987 GL1200 Interstate, Aspencade, LTD and SEI models by Barracuda Bike Parts™....more

High strength Shen Chuen Lite tall clear acrylic replacement windshield by Barracuda Bike Parts™ for models with 1980-1983 Hondaline fairings by Honda . . .

High strength Shen Chuen Lite acrylic, tall tinted replacement windshield by Barracuda Bike Parts™ for 1980 to 1983 Hondaline fairings typically installed on models: . . .

High strength Shen Chuen Lite tinted acrylic replacement windshield for all 1980 to 1983 Hondaline fairings by Barracuda Bike Parts.  This acrylic has superb optical clarity, excellent light diffusion and super weather and UV resistance in tropical and cold climates. More...