Saber_Logo.gif

GoldWing GL1000 GL1100 GL1200 Tools

Click on the product's name or picture to review or rate these products.
Battery Jumper Cables
These jumper Cables by Emgo are a compact 10-gauge shielded copper set that fold neat and compact, making them suitable for motorcycle, ATV and marine use.
Part Number 76-308
$16.00
tab_red_button_view.gif
Battery charger
Battery charger with a 6 or 12 volt operation, power indicator light, automatic shutoff switch that prevents overcharging and is compact and easy to store. The leads on this charger stay permanently affixed to the battery terminals. It plugs into a 110 volt outlet and and can also be used for car, boat, snowmobile or jetski batteries as well! Why pay $40 for a so-called "Tender" that does the same thing? See FAQ10. Click for Suggested Use.
Part Number 87-100
$19.00
tab_red_button_view.gif
Carburetor Adjusting Tool
For manipulating the air fuel adjustment screw and tighten the lock nut without slippage when desired mercury vacuum level is reached. Alloy steel, 11" long. Fits both Mikuni and Keihin carburetors with 8mm hex nut and screw driver slot. Especially required for the GL1000! Eliminates fumbling with inadequate tools while trying to view your mercury manometer carb tuner, 08-010.
Part Number 08-022
$27.00
tab_red_button_view.gif
Carburetor synchronizer, mercury manometer
This mercury carburetor tuner (carb stick) or manometer is designed for the home mechanic. Tuner has a sheet steel body with clear markings for simple accurate tuning and includes a bottle of mercury, hose, line restrictors, 5 mm adapters and easy to follow instructions. Keep your carburetors correctly balanced regularly and inexpensively! NOTE: This item must ship by UPS Ground NOT USPS Priority.
Part Number 08-010
$55.00
tab_red_button_view.gif
Carburetor synchronizer, vacuum gauge
This vacuum gauge carburetor tuner, made by Emgo, comes complete with vacuum gauges, adapters, hoses, mounting plate and instructions. Keep your carburetors correctly balanced regularly and inexpensively!
Part Number 08-030
$135.00 $79.00 ON SALE!
tab_red_button_view.gif
Fork Oil Level Meter
Meter complete with 60 ml calibrated syringe pump for accurate measurement of fork oil level.
Part Number 87-812
$27.00
tab_red_button_view.gif
Koken metric socket wrench set
THIS SET IS A BIT OF HISTORY AND A BARGAIN! THE 3200M SET CONTAINS:

1 each Nos. 6, 8, 9, 10, 12, SIX POINT SOCKETS
1 each Nos.13, 14, 17, 18, 19, 21 TWELVE POINT SOCKETS
1 each 150 mm and 250mm EXTENSION BARS
1 each 250 mm HINGE SLIDING BAR ”T” HANDLES
1 each 150 mm SPIN DRIVER HANDLE
1 each 180 mm REVERSIBLE RATCHET
$39.00
tab_red_button_view.gif
Oil filter wrench
Oil filter wrench for all GL1500 and GL1800 with a neat slip free socket rachet. This wrench will not slip yet it tightens evenly without oil filter damage!
Part Number C17009
$10.00 $7.00 ON SALE!
tab_red_button_view.gif
Spark Plug Wrench 12mm
Extra long D, 12 mm spark plug wrench for Goldwings.
Part Number 87-114
$8.00
tab_red_button_view.gif
Timing cover tool GL1000 GL1100
Timing cover tool for GL1000-1100 is a special wrench to fit the hard to reach bolts of the timing cover to avoid removing the radiator. One end of the wrench is for breaking loose and tightening the bolt and the other end is for spinning off the bolt after loosening.
Part Number 87-130
$19.00
tab_red_button_view.gif
Timing cover tool GL1200
Timing cover tool for GL1200 is a special wrench to fit the hard to reach bolts of the timing cover to avoid removing the radiator. One end of the wrench is for breaking loose and tightening the bolt and the other end is for spinning off the bolt after loosening. Click for Cover Removal
Part Number 87-132
$19.00
tab_red_button_view.gif