Impact driver with four (4) bits comes in a compact blue metal case and instructions. The dimensions of the four bits are:

1.  #2 Phillips 2 x 36mm
2.  #3 Phillips 3 x 36mm
3.  Flat, 5/16 inch (8.25mm) x 36mm
4.  Flat, 3/8 inch (9.55mm) x 36mm

Amber replacement lens for 76-601 and 76-602 turn signal light unit. Replaces Honda OEM 33402-377-671.

Amber replacement lens for 76-009 and 76-010 turn signal light unit . Replaces Honda OEM 33402-431-782.

Tiny vial of 65 to 70 grams of mercury as a replacement for our 08-010 mercury carburetor synchronizer tuner.

OEM 35340-329-003 switch for the front brake light of the 1975 GL1000.

NOTE: This switch fits other models, such as 1970s CB550 and CB750.

Set of four (4) tube o-rings for the carburetor air chamber or plenum of the GL1000 and GL1100. These o-rings were never sold as a separate part by Honda but are included in the OEM carburetor gasket sets for GL1000 ( 16010-371-004 ) and GL1100 ( 16010-463-004 ). They are made of the same material as OEM to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 and GL1100 owners.

One FRONT turn signal (winker) light unit for the 1979 GL1000, 1980 to 1983 GL1100 and 1984 GL1200 Standard.  Unit has chrome body, amber lens with single wire replaces  OEM 33600-425-673. Does not include the mounting stem.

One REAR turn signal (winker) light unit for the 1979 GL1000, 1980 to 1983 GL1100 and 1984 GL1200 Standard.  Unit has chrome body, amber lens with 3-wire connector and replaces  OEM 33400-425-673. Does not include the mounting stem.