50/15 watt, 1157 Halogen bulb. Step on your brakes and remind the tailgaters behind you that you are right in front of them!! You can't have enough lights on the back of your bike!

A standard 12V 55W H7 headlight bulb.

100/55 watt, 12V, H-4 Halogen bulb.

60/55 watt, 12V, H-4 Halogen bulb.

Common H4 headlight bulb in Neon Blue for all applications using an H4-type headlight bulb with stock and/or aftermarket headlight units.

Show quality, all steel, lighted trunk bumper includes 7 lights that mount on rails but the rails are NOT included. This bumper fits both GL1100 and GL1200 but the mounting rail must be identical to our GL1100 rails, 93-473, and GL1200 rails, 93-475.

A pair of chrome, driving light brackets that are intended for mounting driving lights onto case guards (engine crashbars) or any 1 inch tube. Driving lights sold separately as 76-080, can be mounted to these brackets.

A pair of chrome driving light offset brackets made in the M/C Enterprise style to allow the driving lights to clear the fairing and fork of the GL1100 and all 1980-'83 OEM Hondaline fairing applications. Driving lights sold separately as 76-080, can be mounted to these brackets.

Gold-plated eagle with lighted amber emblem that measures 3 inches X 1 .75 inches, and includes pressure sensitive tape for mounting anywhere. Because it uses a low wattage, low-draw, long lasting bulb, this light can be wired as a running light or brake light.

Gold-plated eagle with lighted red emblem that measures 3 inches X 1 .75 inches, and includes pressure sensitive tape for mounting anywhere. Because it uses a low wattage, low-draw, long lasting bulb, this light can be wired as a running light or brake light.

Chrome fender trim with amber lights by Markland that fits only the GL1200.

A pair of chrome brackets that represent the stack brackets used to mount fork stack light sets. NOTE: Depicted #93-279 NOT in stock.

Chrome grill for the lower headlight of the GL1200 allows for the installation of our sidelight grills, 93-264, without interference and recesses in smoothly with no bulging vertical ribs.

Chrome grill for the tail light of the GL1100.

Chrome grills for the fairing marker lights of '85 Limited, '86 SEI models that are specially curved for the fairing markers and sold in pairs.

Chrome grills for the sidelights of the headlight of the GL1200.

5-bar, chrome grill set for the saddlebag light and reflectors on all GL1200 models, '84-'87, and comes in 5 pieces that mount on with double stick adhesive tape.

Chromegrill set for both the left and right rear turn signals of the GL1100 saddlebags that were fitted on the Interstates and Aspencades only. These grills will NOT fit the center split suitcase type Hondaline bags or ANY OTHER APPLICATION WHATSOEVER.

Chrome headlight bezel for Hondaline fairings '80-'83.

Chrome steel visor for the GL1200 is a full prominent shade that allows the installation of our sidelight grills, 93-264, without any interference like the partial, barely noticeable visors sold elsewhere.

Chrome headlight visor with curved GW emblem fits '75 - '83 models with 7 inch headlights.

Quartz halogen headlight that replaces the standard non-halogen headlight unit of the GL1000 and GL1100 with a high intensity 100/55W quartz halogen H4 P45t base bulb.

Quartz halogen headlight that replaces the standard non-halogen headlight unit of the GL1000 and GL1100 with a 60/55W quartz-halogen H4 P45t base bulb.

License plate bracket includes chrome tube frame, black plate and optional brackets for lights.

License plate light set that includes four red King lights, chrome tube frame, black plate and brackets.

Chrome light bar made by M/C Enterprises has 1 Peterson style light unit on a bar measuring 3.75 inches X 3.25 inches and is radiused 90 degrees on the top edge.

Chrome light bar made by M/C Enterprises has 2 Peterson style light units on a bar measuring 9 7/8 (9.875) inches X 3.25 inches and is radiused 90 degrees on the top edge.

Chrome light bar made by M/C Enterprises has 3 Peterson style light units on a bar measuring 15 inches X 3.25 inches and is radiused 90 degrees on the top edge.

Chrome, die-cast, light bracket used for mounting King and Queen lights to .5 inch and 5/8 (.625) inch rail and rack tubing.

Conversion kit that replaces the two bulbs of the GL1200 saddlebag with a light unit that has rear, stop and running lights.

This light unit replaces either the side and / or the center rear saddlebag reflectors on all GL1200 models. Pictures displays two views of the light. Sold as one single light unit.

Chrome steel flat grills for the King light unit.

Chrome steel flat grills that fit the Queen light unit.

Universal driving light kit includes two Peterson-style lights with chrome housing that measure 6 inch X 3 inch X 3 inch and have clear lens. Includes H-3 halogen bulbs, wiring harness and switch.

This raised chrome ABS grill is designed to fit on a Peterson style marker light.

This raised chrome ABS grill is designed to fit on a Queen light.

Amber replacement lens for a King light units, 76-015 and 76-016.

Red replacement lens for a King light units, 76-015 and 76-016.

1930's Chevy-style Art Deco fender light.