Fork brace made of polished alloy for '78-'82 models. For '75 to '77 models, our Fork Brace Riser Adapter, 93-559, is required in order to install this fork brace.

Fork brace riser adapter for GL1000, 1975 - 1977, is required for the installation of fork brace, 93-558, to the high fender models of '75 - '77.

Fork seal top dust cover for the top of the bottom fork leg (fork tube holder) on the GL1000 and is sold in pairs.

Fork seal top dust cover for the top of the bottom fork leg (fork tube holder) on the GL1100. Sold in pairs.

Fork seal top dust cover for the top of the bottom fork leg (fork tube holder) on the GL1200. Sold in pairs.

Fork seals for GL1000. Use ATF fork oil. Sold in pairs.

Fork seals for GL1100. Use ATF fork oil. Sold in pairs.

Fork seals for GL1500. Use ATF fork oil. Sold in pairs.

High-tensile strength progressively wound, high elastic modulus fork springs for GL1000 '75-'79 that replace your totally non-supportive straight-wound fork springs! Read FAQ5. SOLD IN PAIRS.

High-tensile strength progressively wound, high elastic modulus fork springs for GL1100 '80-'83 that replaces your totally non-supportive straight-wound fork springs! Read FAQ5.SOLD IN PAIRS.

High-tensile strength progressively wound, high elastic modulus fork springs for GL1200 '84-'87 that replaces your totally non-supportive straight-wound fork springs! Read FAQ5. SOLD IN PAIRS.

Fork tubes for the GL1000 are precision made in the USA and sold in pairs.

Fork tubes for the GL1100, '80-'82, are precision made in the USA and sold in pairs.

Fork tubes for the '83 GL1100 are precision made in the USA and sold in pairs.

Fork tubes for the GL1200 are precision made in the USA and sold in pairs.

Upper fork covers that fit only GL1200. We do not offer the fork brace that is required to mount this cover on! Click for Installation.