Saber Cycle now stocks a chrome-plated, stock type replacement brake-clutch lever set for the 1975 to 1977 GL1000.
Replaces clutch OEM 53178-369-700 and brake OEM 53175-369-003 levers.
Part # 93-621 $48.00 set
GL1200 Clutch Slave Cylinder Repair Kit Back In Stock at Saber Cycle
The Clutch Slave Cylinder Repair kit for the Honda Goldwing GL1200 is finally back in stock here at Saber Cycle. Note the price hasn’t changed.
Part # 32-0146 $19.00 each
Saber Cycle Brings Back Honda GL1200 Ignition Switch
Another exclusive from Saber Cycle, this ignition switch for all years of GL1200 is an accurate replica of the original OEM and includes two keys.
Honda’s 35100-MG9-682 ignition switch was obsoleted around 2006 and is no longer available.
Part Number 76-156 $149.00 on sale
Turn Signal Lights for GL1000 and GL1100 at Saber Cycle
For those removing their fairings, Saber Cycle now stocks the front and rear turn signal light units for the GL1000 and GL1100 and GL1200 Standard.
Unfortunately, we only offer the OEM front stem, 90155-371-000, for the 1975 to 1978 GL1000 at this time. Customers will have to search Ebay or contact the salvage dealers listed on our Referrals page for the other models.
- Part 76-601 – 1975-78 Front (Round) $35 each
- Part 76-602 – 1975-78 Rear (Round) $35 each
- Part 76-009 – 1979-84 Front (Rectangular) $39 each
- Part 76-010 – 1979-84 Front (Rectangular) $39 each
Impact Driver Set Now Available at Saber Cycle
Saber Cycle added an Impact Driver set with 4 bits to the inventory. 
Includes a compact blue metal case and instructions. The dimensions of the four bits are:
1. #2 Phillips 2 x 36mm
2. #3 Phillips 3 x 36mm
3. Flat, 5/16 inch (8.25mm) x 36mm
4. Flat, 3/8 inch (9.55mm) x 36mm
Part Number 87-250 $29.00 set
Long replacement bits are also available:
Part Number 87-252
$9.00 set
Saber Cycle First to Offer Antenna Replacement Tips
Saber Cycle recently brought in a new supply of CO-AX,CB-AM-FM antennas. This fold-down, stock-style antenna is for 1980 to 1987 Interstate, Aspencade, Limited, SEI models and TYPE I, II, III CLARION PANASONIC radio systems.
Part Number 76-200 – $69.00
But this time, we went a step further for our customers. We special ordered extra 
antenna tips! Now, if you break a tip, you don’t have to buy the whole antenna. In fact, this tip will fit the ballast coil of any of the 76-200 antennas we sold in the past. Allen head set screw not included.
Part Number 76-200T – $8.00 each
Saber Cycle Brings Back GL1100 GL1200 Exhaust Systems
Saber Cycle presents its exclusive 304 Stainless Steel complete exhaust system to fit the Honda Gold Wing GL1100 and GL1200 under brand, Barracuda Bike Parts.
Our system is styled closely to the original OEM design and incorporates the same internal 
muffler chamber resonance design. It mounts in place of OEM systems and even fits up with our 93-573 chrome extensions.
The exhaust system is mirror-polished stainless steel that can be maintained over the years with standard stainless steel polishing compounds. Stainless steel does not degrade when scratched like chrome-plate does when the chrome veneer wears out on 925 grade nickel-plated carbon steel used in most aftermarket pipes. Most stainless steel that is above 300 grade is 18 – 20% elemental chromium in content and 304 being the standard used for most motorcycle and auto aftermarket exhaust systems.
GL1100 – Part 95-1100 $700.00
GL1200 – Part 95-1200 $700.00
GL1000 GL1100 Air Chamber (carb plenum) Tube O-Rings now at Saber Cycle
Due to recent requests for an inexpensive replacement to OEM, Saber Cycle now offers a set of of four (4) tube o-rings for the carburetor air chamber or plenum of the GL1000 and GL1100 by Barracuda Bike Parts.
These o-rings were never sold as a separate part by Honda but are included in the OEM carburetor gasket sets for GL1000 (16010-371-004) and GL1100 (16010-463-004). They are made of the same material as OEM to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 and GL1100 owners.
Part Number 82-332 – $7.00 set of 4
GL1000 GL1100 Air Chamber / Carb Plenum Gasket now at Saber Cycle
After recent requests for an inexpensive replacement to OEM, Saber Cycle invested in the GL1000 and GL1100 carburetor air chamber or plenum gasket that replaces 16075-371-004 and 16075-463-004.
These gaskets are an exact replica of OEM, using the same material to avoid premature hardening, and is an inexpensive fix for those unseen air leaks plaguing the GL1000 owner. Only one gasket required.
GL1000 – Part number: 82-330 $13.00 ea
GL1100 – Part number: 82-331 $13.00 ea
Nolan Helmet Lock Extensions now at Saber Cycle
Saber Cycle now sells tri-chrome helmet lock extensions for Nolan-style helmets that slip through the helmet D-ring at one end and the helmet lock at the other end to make locking easier.
Part # 93-250 $15.00 per pair
Follow Us!